Search
Close this search box.
Search
Close this search box.

HSD Replacement Spindle – 8KW, ISO30, Long Nose, 220/380V

HSD Replacement Spindle

8KW S1 Rated Power

ISO30

Long Nose

220/380V

 

$7,749.00

HSD Replacement Spindle

S1 Power: 8kW

S6 Power:

# of Poles: 4

Long Nose

Voltage: 220/380 volts, 3 phase power

Replaces these HSD 929 Models that run on 220 or 380 volts:

H6161H0866, H6161H0821, H6161H0822

Please note: If you have a dual voltage spindle, the terminal box will have a jumper configuration set up for 380V or “Star” or 220V “Delta”. A 380 volt spindle should not be run on 220 volts and if a 220 volt spindle is run on 380 volts, the stator will be damaged.

 

 

Core Exchange

Core exchange policy: We accept cores and will give credit towards the purchase. All cores received are assumed to have worn bearings and must be replaced.

Cores in excellent condition: $2,000 credit

Cores with damaged shafts (higher than .00025″ run-out): $1,500 credit

Cores with with damaged stators: $1,250 credit

Cores with damaged shaft and stator: $1,000 credit

The following items will reduce trade-in value:

Missing clamp group: $500

Missing sensors: $200 each

Broken Fan cover: $300 / $100 if salvageable

Broken Terminal Box” $150

Missing actuator: $650

Sales process:

In order to avoid errors while ordering the spindle, we recommend this process:

  1. Take a pictures of your existing spindle. We need to see the terminal box cover showing the power information. We need to see the front bearing support to know if it is a long or short nose. Also, need to see how much clearance is around the terminal box. We might have a dual voltage spindle that can be used but the extra box may interfere with the machine.
  2. If you have a dual voltage spindle, remove the terminal box cover to check if it is set up for a star or delta connection.
  3. Once the spindle is removed we will send pictures of the replacement spindle showing the length and width to confirm it will fit.
Weight 25 kg
Dimensions 24 × 12 × 12 cm