Search
Close this search box.
Search
Close this search box.

ISO30 Tool Fork Biesse Style P/N TF30B

Type: ISO30

Call for back order status or multiple order discount.

1-714-307-2332 or send inquiries to sales@hsspindles.com

$80.00

ISO30 Tool Fork (P/N TF30B)

Specifications:

Material: Plastic

Manufacturer: Made in Italy.

Maintenance: Tool forks wear out over time. If the spindle is not clamping the tool properly, it may be the tool fork is worn which causes alignment issues. Always insert and remove tool holders laterally. Tool forks should be mounted in an area to reduce the exposure to cutting chips and debris as much as possible. Replace if worn or damaged. The tool holders and spindle taper must be maintained as well. A clean taper, free of debris and burrs will help prevent the tool from sticking. Apply a light coat anti-seize compound to the taper on a regular basis.

Note: Never blow compressed air into the spindle taper.

Compatibility: Can be used with Biesse machines with HSD spindles.

Weight .2 kg
Dimensions 10 × 10 × 1 cm