HSK 63E Tool Gripper Forms ACE P/N G01-29
HSK 63E Tool Gripper Forms ACE
Replaces OTT Jakob and REBO grippers.
Call for back order status or multiple order discount.
1-714-307-2332 or send inquiries to firstname.lastname@example.org
- Additional information
HSK 63E Tool Gripper Forms ACE>
HSK 63E Tool Gripper Forms ACE PN G01-29
Material: Through hardened alloy steel. Precision ground surfaces. Low friction coating.
Manufacturer: Made in Italy.
Balance Grade: <G2.5 @ 24,000 rpm
Maintenance: Protect from rust with rust preventative spray. Remove spray before placing into service. Use correct concentration of coolant to prevent corrosion. Always check tool grippers for scoring or wear. Replace if worn or damaged.
Weekly: Check gripper for damage and debris build up. Apply light coat of anti seize if needed. METAFLUX Moly-Spray No.70-82 is recommended.
Every Six Months: Measure the “E.M” dimension, adjust if necessary. Test clamp force if able.
Compatibility: All HSK 63E, 63A and 63C spindles. Also, HSK A63, B80 and F80. The tool gripper is interchangeable with these grippers:
Dimensions (mm): A = 10.5 B = 21 C = 0.5 D = 31.5 E = 34 F = CH5 G = 10
Notes: HSK tooling offers advantages over ISO tooling. Read here for more information.
HSK World: HSK Links
Note: Grippers made by Ott Jakob require a tool to be present if the spindle is rotating. It is good practice to not mix fingers of the gripper of one unit with another, even if it is the same manufacturer.
|Dimensions||4 × 4 × 7 cm|