HSK 25E Tool Gripper Forms ACE

Specifications:

HSK 25E Tool Gripper Forms ACE PN G01-5

Material: Through hardened alloy steel. Precision ground surfaces. Low friction coating.

Manufacturer: Made in Italy.

Balance Grade: <G2.5 @ 24,000 rpm

Maintenance: Protect from rust with rust preventative spray. Remove spray before placing into service. Use correct concentration of coolant to prevent corrosion. Always check tool grippers for scoring or wear. Replace if worn or damaged.

Weekly: Check gripper for damage and debris build up. Apply light coat of anti seize if needed.  METAFLUX Moly-Spray No.70-82 is recommended.

Every Six Months: Measure the “E.M” dimension, adjust if necessary. Test clamp force if able.

Compatibility: All HSK 25E, 25A and 25C spindles. The tool gripper is interchangeable with these grippers:

Bellodi Tibi Rebo 41.102.01                    Ott Jakob: 95.600.011.3.6

Dimensions (mm): A = 6.5    B = 10.5    C = 0.5    D = 5.5    E = 14   F = CH3    G = 7

Notes: HSK tooling offers advantages over ISO tooling. Read here for more information.

HSK World: HSK Links

HSK 25E Tool Gripper Forms ACE  PN H25ACEP1150 requires a tool to be present if the spindle is rotating.