- Additional information
HSK 32E Tool Fork
Country of Origin: Made in Taiwan
Maintenance: Tool forks wear out over time. Always insert and remove tool holders laterally. Replace if worn or damaged. A clean taper, free of debris and burrs will help prevent the tool from sticking. Apply a light coat anti-seize compound to the taper on a regular basis.
Note: Never blow compressed air into the spindle taper.
Compatibility: Can be used with all HSK 32E tool holders.
Hardware: Comes with two 6mm dowels and M6 SHC screws.
|Dimensions||4.7 × 3.5 × 1.5 cm|