HSK 63 and ISO 40 w/ ER32 Tool Tightening Kit PN TTP-633

HSK 63 and ISO 40 Tool Tightening Stand Kit, comes with ER32 Torque WrenchSpecifications:HSK 63 Tool Tightening Stand: For HSK 63 A thru F tool holdersISO40 Tool Tightening Stand: For ISO40 tool holders with 63 mm diameter flangeMaterial: Steel Body with bidirectional roller bearings that lock in place when turned.Manufacturer: Made in Italy.         Part No.: TTS-6340Recommended Torque:ER16 Hex Nut            42 ft/lbs under 1/16″ Collet I.D.           30 ft/lbs over 1/16″ Collet I.D.ER16 Slotted Nut       42 ft/lbs under 1/16″ Collet I.D.            30 ft/lbs over 1/16″ Collet I.D.ER20 Hex Nut            59 ft/lbs under 1/16″ Collet I.D.            24 ft/lbs over 1/16″ Collet I.D.ER20 Slotted Nut       59 ft/lbs under 1/16″ Collet I.D.            24 ft/lbs over 1/16″ Collet I.D.ER25 Mini Nut            25 ft/lbs under 1/16″ Collet I.D.           25 ft/lbs over 1/16″ Collet I.D.ER25 Slotted Nut        100 ft/lbs under 1/16″ Collet I.D.         100 ft/lbs over 1/16″ Collet I.D.ER32 Slotted Nut       100 ft/lbs under 1/16″ Collet I.D.         100 ft/lbs over 1/16″ Collet I.D.ER40 Slotted Nut       130 ft/lbs under 1/16″ Collet I.D.          130 ft/lbs over 1/16″ Collet I.D.SYOZ 25 Hook Nut    90 ft/lbs under 1/16″ Collet I.D.            90 ft/lbs over 1/16″ Collet I.D.Maintenance: Protect from rust with rust preventative spray.Compatibility: All HSK 63 tool holders. ISO40 tool holders with 63 mm diameter flange.