HSK 63F Tool Fork

Specifications:Material: Plastic insert, held in place by two 8mm dowels. Steel frame for extra strength.Manufacturer: Made in Italy. Hiteco P/N 29L0149776HMaintenance: Tool forks wear out over time. If the spindle is not clamping the tool properly, it may be the tool fork is worn which causes alignment issues. Always insert and remove tool holders laterally. Tool forks should be mounted in an area to reduce the exposure to cutting chips and debris as much as possible. Replace if worn or damaged. The tool holders and spindle taper must be maintained as well. A clean taper, free of debris and burrs will help prevent the tool from sticking. Apply a light coat anti-seize compound to the taper on a regular basis.Note: Works on all HSK 63F tool holders.Compatibility: Can be used with all HSK 63F tool holders