ISO30 Tool Fork

(P/N TF30)

Specifications:

Material: Plastic insert with a steel frame for durability

Manufacturer: Made in Italy.

Maintenance: Tool forks wear out over time. If the spindle is not clamping the tool properly, it may be the tool fork is worn which causes alignment issues. Always insert and remove tool holders laterally. Tool forks should be mounted in an area to reduce the exposure to cutting chips and debris as much as possible. Replace if worn or damaged. The tool holders and spindle taper must be maintained as well. A clean taper, free of debris and burrs will help prevent the tool from sticking. Apply a light coat anti-seize compound to the taper on a regular basis.

2d drawing: link

3d model: link

Note: Please check the layout drawing to see if it will fit on your machine.

Compatibility: Can be used with all ISO30 tool holders with a 50mm diameter flange.